Technical Parameters
Type |
DXH-FW10 |
DXH-FW20 |
DXH-FW30 |
DXH-FW50 |
DXH-FW100 |
Average Output Power |
10W |
20W |
30W |
50W |
100W |
Pulse Repetition Frequency |
22~50 kHz |
30~60 kHz |
30~60 kHz |
50~80 kHz |
20~200 kHz |
Laser Wavelength |
1064nm |
||||
Engraving Speed |
2000mm/s-20000 mm/s(Optional) |
||||
Engraving Area |
F110 /70×70mm -F580/400×400mm(Optional) |
||||
Min Character Height |
0.2mm @ F=160 mm |
||||
Engraving Depth |
0.05-0.5mm(Decided by material and power) |
||||
Min Line Width |
0.06mm@ F=160 mm |
||||
Average Power Stability |
<3%rms |
||||
Working Environment Requirement |
Temperature:0~40°C;Humdity:30%≤RH≤85% |
||||
Power Supply |
1KW/AC220V,50HZ |
||||
Machine Size |
820mm×640mm×1500mm(L×W×H) |
1. Introduction:
Integrated design, lightweight and convenient, It can engraving metal materials and some non-metallic materials. It mainly used in the fields with high requirements on depth, smoothness and fineness.
2. Features:
Excellent Quality: Marking precision, 24hours continuous stable operation.
Use long time: Using time arrived 100000hours.
Low Cost: Electro-optical conversion efficiency is high, compared with the old semiconductor end pump marking machine energy consumption reduced by 75%
3. Application:
3C industry, automobile industry, medical equipment, electronic components, electrical products, IT industry, hardware tools, precision instruments, gifts and accessories, high and low voltage appliances, etc.